Vandal Mark Removers

 

Graffiti Go "A"


Description: 

Designed for marker, ink, pencil, crayon, and lipstick. Not recommended for synthetic surfaces or soft metals.

Directions:

Spray or sponge onto the surface to be cleaned and wipe with a clean cloth. In cases of stubbornness, use a bristle brush or nylon scrubbing pad to work the product into the stained area.  

 

Contact us today to request a free quote!

Graffiti Go "B"


Description: 

Designed for marker, ink, and graffiti. Safe for both indoor and outdoor use.

Directions:

Apply directly to the affected area.  Allow the product to sit for a few seconds and wipe or absorb excess chemicals until clean. Use on walls, stainless steel, partitions, brick, and concrete. 

 

Contact us today to request a free quote!

Graffiti Gone


Description: 

Exterior paintable masonry graffiti remover. Penetrates graffiti, ink, crayon, etc. Strong, fast, and easy!

Directions:
  1. Apply with a long-handled natural-fiber bristle brush.
  2.  Allow the product to sit for a few minutes.
  3. Rinse off with water under pressure. For best results, use hot water with 3000 psi pressure.
  4. A second application may be necessary for stubborn marks.

Contact us today to request a free quote!

Graffiti Gone II


Description: 

Friendly paintable graffiti remover. Non-toxic and non-corrosive. Replaces Methylene Chloride, MEK, Xylene, and other hazardous graffiti removers.

Directions:
  1. Apply the product with a brush.
  2.  Allow the product to sit on the surface until blisters are observed. 
  3. Scrape off the remaining cleaner with a mild detergent cleaner.

 

Contact us today to request a free quote!